Heidenhain, Acu-Rite, Magnescale, Solartron, Anilam, Metro, Metlogix, Mitutoyo, Newall and Fagor


Heidenhain LF 485 Linear Encoder

Heidenhain LF 485 Linear Encoders feature long measuring lengths, high ruggedness, and superb vibration tolerance, allowing them to thrive in harsh environments. An efficient seal design with double lips provides optimal protection from chips, dust, and coolant. Due to the diagonal orientation of the sealing is the scanning unit’s sword, the encoder can be mounted either upright or on its side. The design of the LF 485 is very slim and compact for installation into limited space.

Heidenhain LF 485 Linear Encoders use optical scanning measuring standards of periodic structures known as graduations. These graduations are applied to glass and then generate an incremental signal. These scales have a signal period of 4 um.

The LF linear encoders deliver consistently high accuracy. A high-quality, very low-wear ceramic coupling prevents wear-induced inaccuracy throughout the service life of the encoder.

The Heidenhain LF 485 Linear Encoders have measuring lengths from 140-3040mm. They have an 1Vpp serial interface and an 1Vpp ordering designation. The measuring length is between 50 and 1220mm, and the accuracy is 5um or 3 um depending on the part number.  A 150 m or less cable can be used for this linear encoder. These encoders have a maximum traversing speed of 60 m/min through a single field scanning unit.

A Heidenhain LF 485 sealed linear encoder fulfills the requirements for IP53 protection provided that they are sealed and mounted with the lips facing away from splashed water. If the encoder is exposed to concentrations of coolant or mist a protective cover should be used, or sealing air can be used to provide IP64 protection to more effectively prevent the ingress of contamination. This can be achieved with a DA 400 compressed air unit.